TM 5-3895-370-14&P
5-39. PUMP DRIVE ASSEMBLY REPLACEMENT (CONT).
e.
Installation.
(1)
Install shaft plate assembly (11) on flywheel (12)
with eight lockwashers (10) and screws (9).
(2)
Install housing cover (5) on flywheel housing (8)
with nine lockwashers (7) and screws (6).
(3)
Install engine ground wire (4), negative battery
cable and clamp (3), and screw (2) on housing
cover (5). Tighten screws (2 and 6) to 18 lbs-ft
(24 N.m).
(4)
Install output shaft (1).
NOTE
Follow-on maintenance:
Install hydraulic variable-speed pump (para 5-38).
Install hydraulic cross-over relief valve (para 4-
89).
END OF TASK
5-130
