TM 5-3895-370-14&P
5-67. PISTON AND CONNECTING ROD REPLACEMENT/REPAIR (CONT).
a. Removal.
NOTE
·
Engine can be turned on side
while on stand to facilitate this
task.
·
All
four
piston
and
rod
assemblies
are
removed
the
same way.
·
Tag and mark all screws, rod
caps, and bearing halves upon
removal.
(1)
Mark each piston (1) according to cylinder
number.
NOTE
Bottom bearing halves may come out
with rod caps or stay with crankshaft.
(2)
Mechanic
removes
four
pistons
(1)
and
connecting rods (2) each as an assembly from
top of cylinder block (3) while assistant pushes
each assembly from the bottom.
5-280