TM 5-3895-370-14&P
5-68. CAMSHAFT REPLACEMENT/REPAIR (CONT).
(19)
Measure camshaft gear (5) end play at position
D. Normal measurement is 0.007 to 0.011 in.
(0.178 0.279 mm). If above or below normal
measurement, replace thrust plate (7).
(20)
Measure camshaft gear (5) backlash at position
A. Normal measurement is 0.003 to 0.013 in.
(0.076 0.330 mm). If above or below normal
measurement, replace gear. If measurement is
still not correct, inspect crankshaft gear (6) (para
5-65) and fuel injection pump gear (9) (para 5-
31).
NOTE
Follow-on maintenance:
·
Install rocker arm assemblies
(para 5-22).
·
Install gear cover (para 5-25).
END OF TASK
5-292