TM 5-3895-370-14&PCAUTIONDo not overheat gear or irreparabledamage to gear will result.(11)Heat camshaft gear (5) in suitable oven at 250degrees F (121 degrees C) for 45 minutes.WARNINGWear protective gloves wheninstalling camshaft gear. Gear is hotand can cause severe burns topersonnel.(12)Install camshaft gear (5) loosely on camshaft(2).(13)Check and ensure timing marks on camshaftgear (5) and crankshaft gear (6) are alined.(14)Lubricate thrust plate (7) with grease.(15)Install thrust plate (7) on camshaft (2).(16)Install camshaft gear (5) against thrust plate (7).(17)Install camshaft (2) completely in cylinder block(3).(18)Install two screws (8). Tighten screws 216 lb-in(24 Nm).5-291
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
