TM 5-3895-370-14&P
(2)
Insert wooden dowels into valve tappets through cylinder head. Band dowels together to prevent valve tappets
from falling out of valve bores, or if on stand, first turn engine up side down and dowels will not be needed.
(3)
Remove two screws (2) from thrust plate (3).
CAUTION
Thrust support will drop when gear is pulled. Ensure to catch thrust support or
damage will result to thrust support.
(4)
Pull camshaft gear (1) partially out from engine block (4) and remove thrust plate (3).
(5)
Remove camshaft gear (1) and camshaft (5) as an assembly.
(6)
Remove camshaft gear (1) and key (6) from camshaft (5).
5-287