TM 10-4130-237-14
4-25.
ARMATURE GROUP REPLACEMENT/REPAIR (CONT)
d. Disassembly
NOTE
Repair of the armature group consists of replacement of defective parts. Dur-
ing disassembly of the armature group, inspect parts for wear and damage.
Replace worn or damaged parts.
1 Remove carburetor (para 4-21).
2 Remove intake manifold (para 4-22).
3 Remove two flywheel pulley mounting bolts and two lockwashers. Remove flywheel pulley.
4 Remove eight blower housing mounting bolts. Remove blower housing. Move starter panel assembly
a s i d e.
5 Disconnect spark plug cables from spark plugs.
6 Remove right breather assembly mounting bolts and stop switch wires from breather assembly. Remove
breather assembly.
4 - 64
