TM 10-4130-237-14
4-26.
DIPSTICK AND TUBE ASSEMBLY REPLACEMENT/REPAIR (CONT)
a. Removal
1 Remove two flywheel pulley mounting bolts and two lockwashers. Remove flywheel pulley.
2 Remove eight blower housing mounting bolts. Remove blower housing.
3 Remove dipstick from tube. Remove tube.
4 Remove seal from engine.
b. Installation
1 Install seal in engine.
2 Install tube. Install lockwasher and mounting bolt.
3 Insert dipstick in tube.
4 Install blower housing. Install eight blower housing mounting bolts.
5 Install flywheel pulley. Install two lockwashers and two flywheel pulley mounting bolts.
4-69
