TM 10-4130-237-14
4-27.
STARTER REPLACEMENT (CONT)
CAUTION
To prevent damage to starter, place hand under starter to catch it as outside
mounting bolt is removed.
7 Remove outside mounting bolt and lockwasher.
8 Remove starter. Remove inside mounting bolt and lockwasher.
d. Installation
1 Insert inside mounting bolt and lockwasher in starter. Install starter.
2 Install outside mounting bolt. Do not tighten.
3 Torque inside mounting bolt to 160 in. lb(217 Nm).
4 Torque outside mounting bolt to 160 in. lb (217 Nm).
5 Install cable on starter.
To prevent electric shock, make sure power is disconnected from 12/24 VOLT
INPUT FOR STARTING connection before installing cable nut.
6 Install internal toothed washer and cable nut on starter.
4-74
