TM 10 4320-303-13
(4) Place suction hose (2) and reservoir fill hose (3). Install cover (1) on reservoir (4).
g. Refer to applicable technical manual and clean plastic reservoir if the Hypochlorination Unit, model A-
506131 was used with the distribution point.
h. Refer to applicable technical manual and clean plastic reservoir if Hypochlorination Unit, model 1955-
3 was used with the distribution point.
Figure 2-77. Disassembly of Distribution Point.
NOTE
If disconnecting Hypochlorination Unit model 1955-1 or model A-506131 perform
steps i and j. If disconnecting Hypochlorination Unit model 1955-3 perform steps k
through m.
i. Push cam arms on discharge hose assembly (Figure 2-77, 1) forward to open. Remove hose
assembly (1) attached to male quick-disconnect coupling half (2) on hypochlorination unit (3) outlet
port.
2-111
