TM 10-4320-303-13
4.13.3 Pressure Gauge and Fill Assembly Replacement.
This task covers:
4.13.3.1 Removal
4.13.3.2 Inspection
4.13.3.3 Installation
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic's,
Hypochlorination Unit, Model 1955-1 removed,
Automotive, Section III, Item 1,
refer to paragraph 4.13.1.
Appendix B
Fill Hose Assembly removed, refer to
Material/Parts
paragraph 4.13.2.
Antiseize Tape, Item 9, Appendix E
General Safety Instructions
Do not work on equipment without following
standard shop safety precautions.
4.13.3.1 Removal.
Figure 4-16. Pressure Gauge and Fill Assembly Maintenance.
a. Remove pressure gauge (Figure 4-16, 1) from elbow (2).
b. Remove elbow (2) from nipple (3).
c. Remove globe valve (4) from close nipple (5).
d. Remove close nipple (5) from pipe tee (6).
e. Remove pipe tee (6) from close nipple (7).
4-41
