TM 10-4320-303-13
4.13.4 Strainer Assembly Maintenance. (Continued)
e. Remove strainer body (2) from close nipple (7).
f. Remove close nipple (7) from pilot valve assembly (8).
4.13.4.2 Inspection.
a. Inspect street elbow (1), strainer body (2), strainer cap (4), strainer screen (5), and close nipple (7) for
corrosion, cracks, bends, or damage.
b. Inspect pipe plug (3) for corrosion or damage.
c. Replace all defective or damaged components.
4.13.4.3 Service. Service consists of scrubbing down and rinsing off strainer screen (5), weekly.
4.13.4.4 Installation .
NOTE
Wrap all threaded portions of pressure gauge and fill assembly components with antiseize tape
prior to installation.
Wrap antiseize tape in direction of threads.
a. Install close nipple (7) in pilot valve assembly (8).
b. Install strainer body (2) on close nipple (7).
c. Install gasket (6) and strainer screen (5) in strainer body (2).
d. Install strainer cap (4) in strainer body (2).
e. Insert pipe plug (3) in strainer cap (4). Tighten pipe plug (3).
f. Install street elbow (1) on strainer body (2).
4-44
