Figure 2-35. Connection to Lead Pumping Station

Figure 2-34. Grooved Pipe Coupling and Swivel Joint installation

TM-10-4320-303-13 Tactical Water Distribution Equipment System (TDWS) Set 10-Mile Segement Model 06749-0813-81 110-00-0000 919 and 10 Manual
Page Navigation
86

TM 10-4320-303-13 Figure 2-35. Connection to Lead Pumping Station. CAUTION DO NOT leave hose on roadway or track that will be used by other vehicles. Hoseline is easily damaged by rough handling or abrasive contact with rocks. NOTE Restrain hose assembly manually until first 50 feet of hose assembly is in position. After 50 feet of hose assembly is in position, the weight of the hose will hold line in place. h. Refer to paragraphs 2.3.8.2.4 through 2.3.8.2.7 and deploy hose assembly. i. Continue to lay hose until hoseline in all four boxes has been flaked. CAUTION Swivel joints (Figure 2-36, 1) must be installed at every 1,000 feet in hoseline (2). If not installed, hoseline (2) will twist during startup and cause damage to equipment. j. Repeat steps a through i (leaving out step g) to connect each truckload of hoseline to sections already laid. Be sure to install swivel joints (Figure 2-36, 1) at every 1,000 feet in hoseline (2). k. Connect hoseline (2) to each boost pumping station and storage assembly as those installation sites are reached. 2-69

Privacy Statement
Press Release
Contact