TM 10-4320-346-12&P
Section III. OPERATOR MAINTENANCE PROCEDURES
3-5. GENERAL. This section contains the maintenance procedures which the Maintenance Allocation Chart authorizes
the operator to perform. If the FAWPSS still does not operate properly after performing these maintenance procedures,
contact unit maintenance for assistance.
3-6. GENERAL COMPONENT REPLACEMENT. The FAWPSS comprises a number of separate assembly and
subassembly components. The operator is authorized to replace a number of these separate components if they should
fail. The following components may be replaced (as an assembly) by the FAWPSS operator if they are found to be
defective.
•
Hose Assemblies.
•
Ball Valve Assemblies.
•
Nozzle Assemblies.
•
Nozzle Stand Assemblies.
•
Towing and Lifting Yokes.
•
Miscellaneous Fittings.
In the event that any of the above components fail, the operator should replace the defective component with a properly
functioning component exactly like the one which has failed. The operator should not attempt to make any repairs on
any components found to be defective. All defective FAWPSS components must be sent to unit maintenance who will
repair the defective components as needed.
NOTE
No other operator maintenance is authorized. If the FAWPSS still fails
to operate properly, contact unit maintenance.
3-5 / (3-6 Blank)
