TM 10-4320-346-12&P
4-5. SERVICE UPON RECEIPT. - Continued.
a.
Unloading. - Continued.
(2) Remove all blocking and tie downs that may have been used to secure the crate onto the carrier.
(3) Use a forklift truck or other suitable material handling equipment to remove the crate from the carrier.
b.
Unpacking.
NOTE
The FAWPSS shipping container is designed so that it may be retained
for re-use for mobility purposes when frequent relocation of the system
is anticipated.
(1) Remove top of shipping crate.
(2) Remove the technical publications envelope that is attached to the inside of the crate and put them in a
safe place.
(3) Carefully remove all FAWPSS components and packaging material from crate.
c.
Checking Unpacked Equipment. Check the unpacked FAWPSS as follows:
(1) Inspect each of the FAWPSS components for damage that may have been incurred during shipment,
especially if crate is damaged. If any component has been damaged, report damage on SF 364, Report of Discrepancy.
(2) Check the quantities and type of each component against the packing slip to see if the shipment is
complete. Report all discrepancies in accordance with the instructions as defined within DA PAM 738-750. See that all
Components of End Item and Basic Issue Items (See Appendix D) are with the FAWPSS.
(3) Check to see whether the equipment has been modified.
4-6. INSTALLATION INSTRUCTIONS.
a.
Tools, Test Equipment, and Materials Needed for Installation. The FAWPSS can be assembled by
hand. No special tools, test equipment, or other materials are needed for assembly of the FAWPSS.
4-2
