TM 10-4320-346-12&P
4-16.
TOWING AND LIFTING YOKE.
This Task Covers:
Repair
Initial Setup:
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Material's Required
Brush, Medium Bristle (Appendix F, Item 2)
Solvent, Dry Cleaning (Appendix F, Item 3)
Cloth, Lint-Free (Appendix F, Item 1)
Lock Nuts (Appendix I, Item 4)
Lock Nuts (Appendix I, Item 5)
Equipment Condition
Assembly removed from FAWPSS installation.
Repair. (Refer to Figure 4-6.)
NOTE
Repair is limited to replacement of parts found defective during inspection.
a.
Disassembly.
(1) Remove two s-hooks (1) and two clevis pin assemblies (2).
(2) Remove two screws (3) and two lock nuts (4) from two braces (5).
(3) Remove two screws (6) and two lock nuts (7) and then remove two braces (5) from two connecting
legs (8).
(4) Remove two set screws (9) and two pins (10) and then remove two connecting legs (8) from two
upper legs (11).
b.
Clean.
(1)
Remove all build up of dirt, oil, and debris from all mating surfaces.
WARNING
DO NOT breath dry cleaning solvent vapors for long periods of time or allow
solvent to come into contact with skin for an extended time. DO NOT use solvent
near open flames or excessive heat.
(2)
Clean all metallic parts with a clean soft cloth (Appendix F, Item 1) or a medium bristle brush
(Appendix F, Item 2), and cleaning solvent (Appendix F, Item 3) and allow parts to dry.
4-18