SERVICE MANUALFig. 12 Typical Brake Group with Removable Anchor Pins1Lining (Blocks)5Roller Retainer9Shoe2Link6Roller Assembly10Anchor Pins3Return Spring7Camshaft Assembly11Shoe Retaining Spring4Camshaft Bracket8SpiderFig. 13 Removing Upper Cam Roller3.Lift top shoe and remove the remainingcam roller assembly (Fig. 13).4.After removing roller assemblies, the shoereturn spring will be loose and can beslipped from the links between shoe webs(Fig. 14).5.Swing lower shoe back about 180° torelieve the tension on the retainer springs(Fig. 15). Then remove the inboard andoutboard retainer springs (Fig. 16).6.Remove lower shoe (Fig. 17). Thenremove upper shoe.7.Mark position manual of slack adjuster tocamshaft also noting position of adjustingscrew. The adjuster screw may be facingtoward or away from brake chambermounting surface.8.Remove clevis pin connecting the brakechamber push rod to slack adjuster.CTS-4080W - Page 10
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
