SERVICE MANUAL
Fig. 5 Removing Outboard Mounted Drum
Brake Groups with Backing Plate (Fig. 6)
Rockwell "T" Series Brake Group
The Rockwell “T” series brake group is disassembled it
the same manner as the Wagner brake group.
Wagner Broke Group
1.
Remove shoe return spring or springs. This is
accomplished by either expanding spring with
pliers and unhooking spring between shoes, or
by using a pry bar or large screwdriver and
prying shoe off cam. Then remove roller from
cam end of shoe. Removing rollers first will
relieve most of the tension from return springs,
permitting them to be disconnected from shoes.
The roller retainers (if equipped) must be
disconnected prior to removing the rollers.
2.
Remove "C" washer (retainers) from guide pins.
Then remove flat washers and bowed washers
from guide pins. Note position of washers for
reassembly sequence.
3.
Remove retainers from anchor pins. Then
remove washers, felt retainers and felts from
anchor pins.
Fig. 6 Wagner Foundation Brake Group with Backing Plate
1
Guide Pin
5
Lining
9
Roller
2
Anchor Pin
6
Washers
10
Camshaft Assembly
3
Anchor Pin Retainer
7
"C" Washer
11
Brake Chamber Bracket
4
Shoe
8
Return Spring
CTS-4080W - Page 6
