SERVICE MANUAL
CLUTCH PEDAL SHAFT BUSHING REPLACEMENT
(Refer to Figure 16)
1.
Disconnect clutch pedal return spring.
2.
Disconnect clutch pedal from upper clutch rod by
removing cotter pin and clevis pin.
3.
Disconnect brake pedal return spring (where
used).
4.
Disconnect brake pedal from brake cylinder rod
(where used).
5.
Remove pedal shaft bolt lock nut.
6.
Remove pedal shaft bolt, clutch pedal (with
bushings) brake pedal (with bushings) or pedal
spacer and spacer tube from steering column
support bracket.
7.
Discard old bushings. Inspect spacer tube and
bore(s) of pedal(s) for wear. Replace if worn or
damaged. Replace clevis pin(s), if worn.
CTS-4050- Page 10
