SERVICE MANUAL
GENERAL
Section 1
TORQUE CHART
Figure 9. Torque
1.
Delivery Valve Holder 60 minus 10 N•m
10.
Oil Inlet Fitting 3040 N•m (22-30 ft-lbs)
(43 minus 7 ft-lbs)
11.
Camshaft 100-120 N-m (74-88 ft-lbs)
2.
Barrel Flange Nut 20-25 N•m (14-18 ft-lbs)
12.
Lock Plate Screws 4-7 N•m (3-5 ft-lbs)
3.
Barrel Stud 8-13 N•m (6-10 ft-lbs)
13.
Camshaft Support Bearing Screw 8-10 N•m
4.
Lift to Port Closure Plug 3040 N•m
(6-7 ft-lbs)
(22-30 ft-lbs)
14.
Fuel Return Valve 30-40 N•m (22-30 ft-lbs)
5.
Injection Pump Hub Nut 85-100 N•m
15.
Fuel Fitting 30-40 N•m (22-30 ft-lbs)
(83-74 ft-lbs)
16.
Fuel Inlet Fitting 30-40 N•m (22-30 ft-lbs)
6.
Bearing End Plate 10-12 N•m (7-8 ft-lbs)
17.
Rack Housing Plug 45-55 N•m (33-40 ft-lbs)
7.
Transfer Pump Mounting Studs 3-4 N•m
18.
Adapter Nuts 45-50 N•m (33-36 ft-lbs)
(2-3 ft-lbs)
19.
Adapter Nut 100-110 N•m (74-81 ft-lbs)
8.
Transfer Pump Mounting Nuts 4-7 N•m
20.
Governor Weight Nut 54 N•m (40 ft-lbs)
(3-5 ft-lbs)
Not pictured - governor mounting screws 6-8
9.
Bottom Cover Screws 4-7 N•m (3-5 ft-lbs)
N•m (4-6 ft-lbs)
CGES-375
Printed in United States of America
Page 10
