MAINSHAFT
SECTION VI-A
DISASSEMBLY & REASSEMBLY
19.
Place the 2nd-3rd speed synchronizer over the
clutch gear.
20.
All fluted diameters should be coated with Moly
#2 lube.
21.
Assemble the 3rd speed gear and thrust washer.
Secure them with a snap ring.
22.
The 4th speed gear, complete with thrust
washer, may be assembled to the mainshaft.
Again, secure with a snap ring.
23.
Place the 4th-5th speed synchronizer on the
mainshaft. Then use a suitable driver to install
the pocket bearing.
24.
Set the mainshaft on a bench and install the 1st-
reverse clutch collar and reverse gear with a
caged needle bearing.
18
