TM 5-3825-226-24
PARKING/EMERGENCY BRAKE CONTROL VALVE
4. Remove shaft (7) and the spring from valve body (1).
5. Remove seal (8) from shaft (7).
ASSEMBLE PARKING/EMERGENCY BRAKE
CONTROL VALVE
1. Install seal (1) on shaft (5). Install spring (6) on the
shaft and put the shaft in valve body (2).
2. Install ring (7) in the valve body. Install spacer (3),
washer (8) and nut (4) on the shaft. Hold the end of the
shaft and tighten the nut.
3. Install cover (9) on valve body (2) and install the
screws.
end by:
a)
install parking/emergency brake control valve*
NOTE
This operation is in INSTALL DASH
CONTROLS AND SWITCHES.
3-339
