TM 5-3825-226-24
STEERING COLUMN
5.
Lift the column in position and install bolts (7).
6.
Install clamp (10) to the bracket. Put bearing (9)
in position and install nut (8) with tool (B).
7.
Install the seal even with the surface with tooling
(A). The lip of the seal is toward the inside of
nut (11).
8.
Install nut (11) on the column. Tighten the nut
with a 2 1/4 in. open end wrench. Hold the
column with a chain wrench.
3-343