TM 5-3825-226-24
GOVERNOR CONTROL LINKAGE
INSTALL GOVERNOR CONTROL LINKAGE
1.
Put bushing (4) on shaft (3). Install key (2) and
lever (1) on shaft (3). Tighten the nut.
2.
Install key (5) on the shaft (3).
3.
Install bushing (7) in the bracket. Put pedal (6)
in position and install shaft (3) through the pedal
and the bracket.
4.
Connect governor cable (8) to the lever.
Connect spring (9) to the plate.
end by:
a) install crankcase guard*
*This operation is in the Engine Disassembly and
Assembly
3-346
