TM 5-3825-226-24
STEERING COLUMN
14.
Remove bearing (19) from the bottom of the
column (14).
INSTALL STEERING COLUMN
Tools Needed
A
B
1P510
Driver Group
1
1 P2852
Spanner Wrench
1
1.
Install the bearing with tooling (A) in the bottom
of column (1).
2.
Install column (1) in the cab. Install shaft (2) in
the column. Lower the column as far as
possible.
3.
Turn stop (3) on to the column. Install key (4)
and lever (5) on the end of the shaft.
4.
Install the washer and bolt (6) to the end of the
shaft. Install the wire through bolt (6) and
around shaft as shown.
3-342
