TM 5-3825-226-24
GOVERNOR CONTROL LINKAGE
REMOVE GOVERNOR CONTROL LINKAGE
start by:
a) remove crankcase guard*
*This operation is in the Engine Disassembly and
Assembly.
1.
Disconnect spring (1) from the plate. Remove
nut (2) and disconnect the governor cable from
the lever.
2.
Loosen bolt (3) in back of the pedal. Remove
shaft (4) from the cab. Remove pedal (5).
3.
Remove bushing (6) from the bracket.
4.
Remove key (8). Loosen nut (10) and remove
lever (7) from shaft (4). Remove the key under
the lever and slide bushing (9) off the shaft.
3-345
