TM 5-3825-226-24
STEERING COLUMN
6.
Remove nut (8) with a 2 1/4 in. open end
wrench. Hold the column with a chain wrench if
needed. Remove seal (7) from nut (8).
7.
Remove nut (9) with tool (B). Remove bearing
(10) from the shaft.
8.
Remove two bolts (12) from the steering column
clamp. Remove clamp (11) from the steering
column.
9.
Move the mat enough to remove bolts (13).
Then lower column (14) as far as possible.
10.
Remove the wire from bolt (17). Remove bolt
(17) and the washer from end of shaft.
11.
Remove lever (16) with a hammer. Remove
the key from the shaft.
12.
Turn stop (15) off the column.
13.
Remove steering column (14) from the cab. Re
move shaft (18) from the column.
3-341
