TM 5-3825-226-24
STEERING COLUMN
REMOVE STEERING COLUMN
Tools Needed
A
B
1H3107
Puller Assembly
1
8B7551
Bearing Puller Attachment
1
8H684
Ratchet Box Wrench
1
T774
Spacer
1
1 P2852
Spanner Wrench
1
1. Remove tube (2) from the machine. Disconnect
tubes (1) and (3) from the brake valve.
2. Remove cotter pin, nut and bolt (4) from the lever on
the end of the steering column.
3. Remove screws, cover (5) from the steering wheel.
Remove the three spacers under the cover.
4. Remove nut (6) from the shaft.
5. Install tooling (A) and remove the steering wheel.
3-340
