TM 5-3825-229-14&P
4-58. ALTERNATOR (cont)
c.
Installation.
(1)
Install bracket (19) on engine and secure with
two screws (17) and flat washers (18).
(2)
Install adapter (16) on shaft of alternator (2).
Use a suitable press to drive pulley
(15) on
alternator shaft.
(3)
Install alternator (2) in position in bracket
(19). Install spacer (14). Install screw (13),
washer (12) and nut (11). Do not tighten nut at
this time.
(4)
Install adjusting strap (9), with spacer (1 0) and
guard (8) on engine and alternator. Install
lower hook on guard over screw (13). Install
washers (4) and screws (3). Do not tighten
screws as this time.
(5)
Connect harness wires (1) to alternator (2).
(6)
Refer to para. 4-57 and install fan belt on
pulley and adjust tension of fan belt.
(7)
Install belt guard (7) on engine and secure
with five washers (6) and screws (5).
(8)
Refer to para. 4-56 and install engine cover.
(9)
Refer to para. 4-22 and connect battery cables.
4-127
