STARTER MOTOR (cont) - TM-5-3825-229-14P

STARTER MOTOR (cont) - TM-5-3825-229-14P_221

ENGINE WIRING (cont) - TM-5-3825-229-14P_223

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
204

TM 5-3825-229-14&P 4-59. STARTER MOTOR (cont) c. Installation. (1) Install starter (2) on flywheel housing. Secure with two screws (8) and flat washers (9). Tighten screws to a torque of 62 Ib-ft (84 Nm) (wet). (2) Connect battery cable (3) and lead wires (1) to starter (2). Secure cable and wires with washers (5 and 7), nut (4) and screw (6). (3) Connect positive cable (3) to battery (5) first. Then connect ground cable (1) to battery. Removing and Installing Starter Motor 4-59A. ENGINE WIRING THIS TASK COVERS: a. Inspection b. Removal Equipment/Materials Required: c. Installation Tags (Item 14, Appendix E) INITIAL SETUP: Equipment Conditions Tools Required: Ref Conditions Nomenclature: 2-14 Engine shut off General Mechanics 4-22 Battery cables disconnected Tool Kit 4-56 Engine door removed 4-130

Privacy Statement
Press Release
Contact