TM 5-3825-229-14&P
4-59A. ENGINE WIRING (cont)
a.
Inspection.
WARNING
Electrical shock hazard exists. Disconnect battery cables (para. 4-22).
(1)
Inspect all wiring for evidence of breaking, fraying insulation and deterioration.
(2)
Inspect ail connectors on end of wires for bent or damaged condition.
(3)
Check all wiring for solid and secure connections.
(4)
Replace or repair wiring if it is broken, has fraying insulation, or connectors are bent or damaged.
b.
Removal.
(1) Tag and disconnect electric lines leading from engine relay panel to engine and water spray system as
follows:
(a)
Disconnect wires from spray valve solenoid valves (para. 4-60).
(b)
Disconnect wires from liquid level transmitter (para. 4-24).
(c)
Disconnect cables from engine (para. 4-23).
(d)
Disconnect wires from throttle actuator (para. 4-54).
(e)
Disconnect wires from alternator (para. 4-58).
(f)
Disconnect wires from oil pressure switch and water temperature switch (para. 4-46B).
(g)
Disconnect wires from fuel injection pump.
(h)
Disconnect two wires from starter (para. 4-59)
(i)
Disconnect wire from glow plug (para. 4-46C).
(j)
Remove engine relay panel (para. 4-12).
4-131
