TM 5-3825-229-14&P
4-60. LINES AND FITTINGS
THIS TASK COVERS:
a.
Removal
b.
Installation
INITIAL SETUP:
Tools Required:
Personnel Required: 2
Nomenclature:
General Mechanics
Tool Kit
Equipment Materials Required:
Equipment Conditions:
Rags (Item 6, Appendix E)
Ref
Conditions
Tags (Item 14, Appendix E)
Pipe Sealant (Item 11, Appendix E)
2-14
Engine shut off
2-21
Water tank drained
4-22
Battery cables disconnected
4-29
Air reservoirs drained
4-63
Spray nozzles removed
4-64
Angle discharge valve removed
a.
Removal.
WARNING
Electric shock hazard exists. Disconnect battery cables (para. 4-22).
(1)
Pull back looms (1). Tag and disconnect solenoid valve wires (2) from spade lugs (3).
(2)
Disconnect air line (4) from tee (5). Remove air lines (6) from tee (5) and solenoid valves (7). Remove
elbows (16) from solenoid valves (7).
(3)
Disconnect air lines (8 and 9) from elbows (1 0). Remove elbows (1 0) from valve (1 1), adapter (12) and tee
(13).
(4)
Remove adapter (12) from spray valve (14). Remove remaining elbow (10) from second spray valve (14).
(5) Remove valve (1 1) and nipple (15) from tee (21).
4-133
