TM 5-3895-370-14&P
G-12. SWIVEL STAND REMOVAL TOOL FABRICATION.
NOTES:
1.
FABRICATE ROD FROM 3/4 IN. (19.05 MM) COLD ROLLED STEEL.
2.
CUT ROD 12 IN. (304.80 MM) IN LENGTH.
3.
FABRICATE PLATES FROM 1/2 IN. (12.70 MM) THICK MILD STEEL STOCK
4.
CUT TWO PLATES 1 1/2 IN. (38.10 MM) BY2 1/4 IN. (57.15 MM).
WARNING
UNSAFE WELDING PRACTICES CAN CAUSE SERIOUS INJURY FROM FIRE,
EXPLOSIONS, OR HARMFUL AGENTS. ALLOW ONLY AUTHORIZED PERSONNEL
TO WELD OR CUT METALS, AND FOLLOW SAFETY PRECAUTIONS IN TC 9-237.
PROTECTIVE
CLOTHING
AND
GOGGLES
MUST
BE
WORN;
ADEQUATE
PROTECTIVE EQUIPMENT USED, A SUITABLE FIRE EXTINGUISHER KEPT
NEARBY; AND REQUIREMENTS OF TC 9-237 STRICTLY FOLLOWED.
5.
WELD TWO PLATES FLUSH WITH END OF ROD AND 3/8 IN. (9.65 MM) APART.
6.
FILE OFF ROUGH EDGES.
Figure G-9. Swivel Stand Removal Tool
G-10