TM 5-3895-370-14&P
(4)
Remove chassis wire harness (1) from rear
markerlight (14) as follows:
NOTE
Remove spiral cable wrap from wire
harness only until markerlight snap
plug connectors are visible.
(a)
Remove spiral cable wrap (3) from wire
harness (1).
(b)
Disconnect wire connector (15) from wire
harness (1) and left rear markerlight (14).
(c)
Repeat Steps (a) and (b) for right rear
markerlight (14).
(5)
Remove chassis wire harness (1) from taillight
assembly (16) as follows:
(a)
Remove nut (17), lockwasher (18), and
two ground wires (19) from left taillight
assembly (16). Discard lockwasher.
NOTE
Remove spiral cable wrap from wire
harness only until taillight snap plug
connectors are visible.
(b)
Remove spiral cable wrap (3) from wire
harness (1).
(c)
Disconnect four wire connectors (20) from
wire harness (1) and taillight assembly
(16).
(d)
Repeat Steps (a) thru (c) for right taillight
assembly (16).
4-237
