TM 5-3895-370-14&P
(9)
Remove chassis wire harness (1) from front
clearance light (33) and markerlight (34) as
follows:
(a)
Remove six nuts (35), lockwashers (36),
clamps (37), and wire harness (1) from
main frame (32). Discard lockwashers.
NOTE
· Remove plastic ties as necessary.
· Remove spiral cable wrap from wire
harness only until light wire
connectors are visible.
(b)
Remove spiral cable wrap (3) from wire
harness (1).
(c)
Disconnect two wire connectors (38) from
wire harness (1), clearance light (33), and
markerlight (34).
(d)
Repeat Steps (b) and (c) for left clearance
(33) and markerlight (34).
(e)
If damaged, remove six clamps (37) and
spiral cable wrap (3) from wire harness
(1).
b. Installation.
(1)
Install chassis wire harness (1) on front clearance light (33) and markerlight (34) as follows:
NOTE
Install spiral cable wrap on wire harness only until light wire connectors are
visible.
(a)
If removed, install spiral cable wrap (3) and six clamps (37) on wire harness (1).
(b)
Connect two wire connectors (38) on markerlight (34), clearance light (33), and wire harness (1).
(c)
Install spiral cable wrap (3) on two wire connectors (38).
(d)
Repeat Steps (b) and (c) for left clearance light (33) and markerlight (34).
NOTE
Install plastic ties as necessary.
(e)
Install wire harness (1) on main frame (32) with six clamps (37), lockwashers (36), and nuts (35).
4-239
