TM 5-3895-370-14&P
4-90. SLAVE CONNECTOR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's: automotive
TM or Para
Condition Description
Wheels chocked.
Materials/Parts
Para 2-10
Jackstand lowered.
Lockwashers (4)
Para 4-84
Disconnect negative
Lockwashers (2)
battery cable.
a. Removal.
(1)
Remove cap (1) from connector (2).
(2)
Remove four screws (3), lockwashers (4), rope
clamp (5), and connector (2) from housing (6).
Discard lockwashers.
(3)
Remove two screws (7) and cables (8) from
connector (2).
(4)
If damaged, remove two nuts (9), lockwashers
(10), screws (11), and housing (6) from main
frame (12). Discard lockwashers.
b. Installation.
(1)
If removed, install housing (6) on main frame
(12) with two screws (11), lockwashers (10), and
nuts (9).
CAUTION
Match positive and negative cables
with
markings
on
connector
terminals. Failure to comply may
result in damage to equipment.
(2)
Install cables (8) and screws (7) on connector
(2).
(3)
Install connector (2) and rope clamp (5) on
housing (6) with four lockwashers (4) and screws
(3).
(4)
Install cap (1) on connector (2).
NOTE
Follow-on maintenance: Connect
negative battery cable (para 4-78).
END OF TASK
4-244
