TM 5-3895-370-14&P
4-88. CHASSIS WIRE HARNESS REPLACEMENT (CONT).
(2)
If removed, install five clamps (31) on wire
harness (1).
(3)
Install wire harness (1) on main frame (32) with
five clamps (31), lockwashers (30), and nuts
(29).
(4)
Install chassis wire harness (1) on bumper (21)
as follows: (a) If removed, install three clamps
(24 and 28) on wire harness (1).
(b)
Install wire harness (1) on bumper (21)
with two clamps (28), lockwashers (27),
and nuts (26).
(c)
Install screw (25), clamp (24), lockwasher
(23), and nut (22).
(5)
Install chassis wire harness (1) on taillight
assembly (16) as follows: (a) Connect four wire
connectors (20) on wire harness (1) and left
taillight assembly (16).
(b)
Install spiral cable wrap (3) on wire
harness (1).
(c)
Install two ground wires (19), lockwasher
(18), and nut (17).
(d)
Repeat Steps (a) thru (c) for right taillight
assembly (16).
4-240