TM 5-3895-370-14&P
(2)
To stow jackstand (1), proceed as follows:
(a)
Remove hair pin (4) and pin (5) securing jackstand (1) to frame bracket (6).
(b)
Rotate jackstand (1) 90 degrees, then insert pin (5) and hair pin (4) to secure jackstand (1) to frame
bracket (6) in stowage position.
(c)
To install jackstand for use, remove hair pin (4) and pin (5) securing jackstand (1) to frame bracket
(6)
and rotate jackstand (1) 90 degrees. Insert pin (5) and hair pin (4) to secure jackstand (1) to frame
bracket (6).
c.
Support Jacks Operation and Stowage.
(1)
To operate support jacks (1), proceed as
follows:
(a)
Remove pin (2) and pin (3) securing
support jack (1) to jack holder (4).
(b)
Lower jack (1) to desired height.
(c)
Install pin (3) through jack holder (4)
and jack (1). Install pin (2) in pin
(3).
(2)
To stow support jacks (1), proceed as follows:
(a)
Remove pin (2) and pin (3) securing
support jack (1) to jack holder (4).
(b)
Raise jack (1) to desired height.
(c)
Install pin (3) through jack holder (4)
and jack (1). Install pin (2) in pin
(3).
2-23
