TM 5-3895-370-14&P
4-135. HYDRAULIC CONTROL LEVERS AND LINKAGE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's: automotive
TM or Para
Condition Description
Wheels chocked.
Materials/Parts
Para 2-10
Jackstand and
Grease, silicone (item 24, Appendix E)
support jacks lowered.
Para 4-134
Hydraulic valve bank
assembly removed.
a. Removal
NOTE
This task shows replacement of one lever and linkage. The procedure is the same
for all four levers and linkage.
(1)
Remove two snap rings (1) from pins (2) on lever (3).
(2)
Slide two pins (2) out of lever (3) and remove lever (3) from control valve (4).
(3)
Remove snap ring (5) from pin (6) on linkage (7).
(4)
Slide pin (6) out of linkage (7) and remove from control valve (4).
4-355
