TM 5-3895-370-14&P(5)Remove three elbows (12, 13, and 14) and twoadapters (15 and 16) from motor (10).(6)Remove and discard two preformed packings(17 and 18) from two adapters (15 and 16).(7)Remove and discard preformed packing (19)from elbow (13).b. Disassembly.CAUTION·When clamping motor in vise do not clamp motor across motor housing, clampacross mounting flange. Failure to comply may cause damage to equipment.·Do not mark or scratch mounting flange. Use soft jawed vise when clampingmotor. Failure to comply may cause damage to equipment.·Mounting flange may become distorted if excessive clamping pressure is used.Do not use excessive clamping pressure. Failure to comply may causedamage to equipment(1)Place motor (1) in vise with valve b ody (2)upward.(2)Remove four screws (3 and 4).CAUTIONLoose parts may fall if valve body isnot removed carefully. Lift valvebody straight upward when removing.Failure to comply may causeequipment damage.(3)Remove valve body (2).5-163
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
