TM 5-3895-370-14&P
NOTE
·
Do
not
disassemble
gerotor.
Gerotor must be replaced as an
assembly.
·
Rollers may become separated
from gerotor. Do not replace
gerotor,
reinstall
rollers
in
gerotor.
(13)
Remove gerotor (20).
(14)
Remove two preformed packings (21) from
gerotor (20). Discard preformed packings.
(15)
Remove seal (22) from bearing housing (23).
Discard seal.
(16)
Remove spur gear (24).
NOTE
Remove bearing housing from vise to
perform the following steps.
(17)
Remove eight screws (25), washers (26), and
mounting bracket (27). Discard washers.
(18)
Remove shaft seal (28), backup ring (29), and
dust seal (30) from mounting bracket (27).
Discard shaft seal, backup ring, and dust seal.
(19)
Remove seal (31) from bearing housing (23).
Discard seal.
5-165