TM 5-3895-370-14&P
5-48. HYDRAULIC MOTOR REPLACEMENT/REPAIR (CONT).
(25)
Remove alinement studs.
(26)
Install four screws (27 and 28) and tighten to 60 40 lb-in (68 ± 58 Nm) in sequence.
(27)
Install two preformed packings (29) on two plugs (30).
(28)
Install two balls (31), springs (32), and plugs (30) in valve body (20).
(29)
Remove hydraulic motor (33) from vise.
e. Installation.
NOTE
Apply hydraulic fluid to preformed
packings before installation.
(1)
Install preformed packing (19) on elbow (13).
(2)
Install two preformed packings (17 and 18) on
two adapters (15 and 16).
(3)
Install two adapters (16 and 15) and three
elbows (14, 13, and 12).
5-170
