TM 5-3895-370-14&P
NOTE
Only remove one side of tie rod
unless replacing tie rod.
(2)
Remove two nuts (4), two lockwashers (5), and
tie rod (3). Discard lockwashers.
(3)
Separate inlet section (6), four valve bodies (7),
and outlet section (8).
(4)
Disassemble inlet section (6) as follows:
(a)
Remove four preformed packings (9 and
10)
from
inlet
section
(6).
Discard
preformed packings.
NOTE
Relief valve must be replaced as an
assembly.
(b)
Remove relief valve (11), copper washer
(12), spring retainer (13), spring (14),
washer (15), and poppet (16).
(c)
Remove poppet base
(17)
from
inlet
section (6).
(d)
Remove adapter (18) from inlet section
(6).
5-173