TM 5-3895-370-14&P
5-59. SPRAYBAR ASSEMBLY REPAIR.
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Tools
Materials/Parts - Continued
Tool kit, general mechanic's: automotive
Gasket, spray valve (14)
Locknuts (5)
Shop equipment, automotive maintenance and
Locknuts (8)
repair: organizational maintenance supplemental
Locknut
no. 1, less power
Preformed packing
Cotter pins (4)
Shop equipment, automotive maintenance and
Cotter pins (6)
repair: organizational maintenance common
Cotter pins (2)
no. 1, less power
Washers, fiber (28)
Shop equipment, automotive maintenance and
Equipment Condition
repair: field maintenance, supplemental no. 1,
TM or Para
Condition Description
less power
Para 4-140
Raise/lower cylinder
removed.
Materials/Parts
Para 4-142
On/off cylinder
Brush, stiff bristle (item 6, Appendix E)
Para 4-158
removed.
Compound, sealing (item 17, Appendix E)
Swing joint section
Oil, lubricating (item 33, Appendix E)
removed.
Rags, wiping (item 47, Appendix E)
Solvent, drycleaning (item 50, Appendix E)
a. Disassembly.
(1)
Remove cotter pin (1), washer (2), clevis pin (3),
and left upper linkage (4) from swivel block (5).
Discard cotter pin.
(2)
Repeat Step (1) above to remove right upper
linkage (4).
5-224
