TM 5-3895-370-14&P
5-59. SPRAYBAR ASSEMBLY REPAIR (CONT).
NOTE
Record position of nuts on lever rod
before removing.
(9)
Remove two yoke ends (21) and nuts (22) from
lever rod (23).
(10)
Remove male union halve (24), nut (25), nipple
(26), and elbow (27) from gate valve (19).
(11)
Loosen nut (28) and remove gate valve (19)
from center support section (15).
(12)
Remove female union halve (29), three nipples
(30 and 31), and three elbows (32) from center
support section (15).
(13)
Remove cap (33) from center support section
(15).
(14)
Repeat Step (12) above to disassemble left side
piping of center support section (15).
5-226