TM 5-3895-370-14&P
5-59. SPRAYBAR ASSEMBLY REPAIR (CONT).
NOTE
Spray valve assemblies on spraybar
and
spraybar
extensions
are
removed in the same way.
(24)
Remove two screws (53), two fiber washers
(54), spray valve assembly (55), and gasket (56)
from center support section (15). Discard fiber
washers and gasket.
(25)
Repeat Step (24) above to remove remaining 13
spray valve assemblies (55).
(26)
Disassemble spray valve assembly as follows:
NOTE
Spray
nozzles
on
spraybar
and
spraybar extensions are removed in
the same way.
(a)
Remove cotter pin (57) and pin lever (58)
from nozzle spool (59). Discard cotter pin.
(b)
Remove retaining ring (60) from nozzle
spool (59).
(c)
Remove nozzle spool (59) from nozzle
body (61) as an assembly.
(d)
Remove and discard preformed packing
(62) from nozzle spool (59).
(e)
Remove spray nozzle (63) from valve
body (61).
(27)
Remove petcock (64) and elbow (65) from
center support section (15).
NOTE
A petcock is shown instead of the
plug which may be present. If plug is
present, it is removed in the same
way as petcock.
(28)
Remove petcock (64) from elbow (65).
5-228