TM 5-3895-370-14&P
WARNING
Adhesive causes immediate bonding
on
contact
with
eyes,
skin,
or
clothing and also gives off harmful
vapors. Wear protective goggles and
use
in
well-ventilated
area.
If
adhesive gets in eyes, try to keep
eyes open; flush eyes with water for
15
minutes
and
get
immediate
medical attention.
NOTE
Apply coat of sealing compound to
threads of cap and piping prior to
installing.
(17)
Install cap (33) on center support section (15).
(18)
Install three elbows (32), nipples (30 and 31),
and female union halve (29).
(19)
Repeat Step (18) above to assemble left side
piping of center support section (15).
(20)
Install gate valve (19) on center support section
(15). Tighten nut (28).
(21)
Install elbow (27), nipple (26), nut (25), and male
union halve (24) on gate valve (19).
5-233
