TM 5-3895-370-14&P
5-59. SPRAYBAR ASSEMBLY REPAIR (CONT).
(22)
Install two nuts (22) and yoke ends (21) on lever
rod (23). Adjust nuts and yoke ends to position
recorded in disassembly Step (9).
(23)
Install lever rod assembly (18) on gate valve
(19) and upper on/off bar (20) with two clevis
pins (17) and cotter pins (16).
(24)
Install two swivel blocks (5), clevis pin (14), two
washers (13), and two cotter pins (12) on center
support section (15).
(25)
Install upper linkage (4) on swivel block (5) with
clevis pin (11), washer (10), and cotter pin (6).
(26)
Repeat Steps (24) and (25) above to assemble
right upper linkage (4) and two swivel blocks (5).
5-234
