TM 5-3895-370-14&P
(4)
Remove two screws (9), two fiber washers (10),
spray valve assembly (11), and gasket (12) from
side joint section (8). Discard fiber washers and
gasket.
(5)
Repeat Step (4) above to remove remaining six
spray valve assemblies (11).
(6)
Disassemble spray valve assembly as follows:
(a)
Remove cotter pin (13) and pin lever (14)
from nozzle spool (15). Discard cotter pin.
(b)
Remove retaining ring (16) from nozzle
spool (15).
(c)
Remove nozzle spool (15) from nozzle
body (17) as an assembly.
(d)
Remove and discard preformed packing
(18) from nozzle spool (15).
(e)
Remove spray nozzle (19) from valve
body (17).
5-237