TM 5-3895-370-14&P
5-60. SIDE JOINT SECTION REPAIR (CONT).
(7)
Assemble end cap assembly as follows:
(a)
Install two link bar clamps (26), screws
(28), and locknuts (27) on end cap (29).
(b)
Install two handles (22) and nuts (20) on
link bar clamps (26).
(8)
Install two roll pins (25) on side joint section (8).
(9)
Install gasket (24) and end cap assembly (23)
on side joint section (8). Push two handles (22)
down against side joint section.
(10)
Install two wing nuts (21) and tighten nuts (20).
5-242
