TM 5-3895-370-14&P
(11)
Assemble spray valve assembly as follows:
(a)
Install spray nozzle (19) in nozzle body
(17).
NOTE
Apply a coat of oil on preformed
packing prior to installing.
(b)
Install preformed packing (18) on nozzle
spool (15).
(c)
Install nozzle spool (15) in nozzle body
(17) as an assembly.
(d)
Install retaining ring (16) on nozzle spool
(15).
(e)
Install pin lever (14) and cotter pin (13) on
nozzle spool (15).
(12)
Install gasket (12), spray valve assembly (11),
two fiber washers (10), and two screws (9) on
side joint section (8).
(13)
Repeat Step (12) above to install remaining
eight spray valve assemblies (11).
(14)
Install two brackets (4), two screws (7), and two
locknuts (6) on side joint section (8).
(15)
Install 17 roll pins (5) on on/off bar (2).
(16)
Install on/off bar (2), two screws (3), and
locknuts (1) on two brackets (4).
NOTE
Follow-on maintenance: Install side
joint section (para 4-158).
END OF TASK
5-243
